ULTRASONIC SENSOR(for Front Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 1 ULTRASONIC SENSOR


    1. B004EC8

      Disconnect the connector.

    2. B004FHZ

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

  3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tech Tips

    Perform this step only when necessary.


    1. B004GWH

      Remove the No. 1 ultrasonic sensor retainer.

  4. REMOVE NO. 2 ULTRASONIC SENSOR


    1. B004GJ0

      Disconnect the connector.

    2. B004GB0

      Disengage the 2 claws to remove the No. 2 ultrasonic sensor.

  5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER


    1. B004EPS

      Disengage the 4 claws to remove the No. 2 ultrasonic sensor retainer from the front bumper assembly.