REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

  1. REMOVE REAR SEAT CUSHION

    B238042

    1. Remove the 2 screws and 2 cushions.

  2. REMOVE REAR SEATBACK PROTECTOR

    B238024

    1. Remove the 2 screws.

    2. Detach the 2 hooks and remove the protector.

  3. REMOVE REAR SEAT CUSHION UNDER COVER RH

    B238043

    1. Using a moulding remover, detach the hooks and remove the cover.

  4. REMOVE SEAT CUSHION COVER WITH PAD

    B238045

    1. Disconnect the seat cushion band from the seat cushion cover.

    2. Detach the hooks and remove the seat cushion cover with pad.

  5. REMOVE NO. 1 SEAT CUSHION COVER RH

    B238049C01

    *1

    Tack Pin

    1. Cut off the tack pins and remove the cover from the cushion pad.

  6. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH

    B247670

    1. Remove the hog rings and seat cushion cover from the seat cushion pad.

  7. REMOVE REAR SEAT CUSHION BAND

    B252752C01

    *1

    Rubber Band

    *2

    Seat Cushion Lock Wire

    *3

    Seat Cushion Frame Wire

    1. Detach the rubber band of the rear seat cushion band from the seat cushion lock wire, and then untie the rear seat cushion band from the seat cushion frame wire and remove it.

  8. REMOVE REAR SEAT LEG BRACKET COVER

    B247650

    1. Using a moulding remover, detach the 4 claws and 2 guides, and then remove the cover.

      Tip:

      Use the same procedure for both covers.

  9. REMOVE REAR SEAT LEG COVER

    B237996

    1. Detach the claw and guide, and then remove the cover.

      Tip:

      Use the same procedure for both covers.

  10. REMOVE NO. 1 SEATBACK BOARD SUB-ASSEMBLY

    B238055

    1. Using a clip remover, detach the 3 clips.

    2. Detach the guide and remove the board.

  11. REMOVE REAR SEAT INNER RECLINING COVER RH

    B238056

    1. Remove the screw.

    2. Detach the 2 guides and remove the cover.

  12. REMOVE REAR SEAT CENTER INNER BELT ASSEMBLY

    Click here

  13. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY

    B238058

    1. Remove the screw.

    2. Detach the 2 guides and remove the cover.

  14. REMOVE CENTER SEATBACK ASSEMBLY

    B247671

    1. Using a T45 "TORX" socket wrench, remove the "TORX" bolt and bush.

    2. Using a T40 "TORX" socket wrench, remove the 2 bolts and center seatback.

  15. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

    1. Remove the headrest.

  16. REMOVE CENTER SEAT HINGE COVER

    1. B247672

      Using a T45 "TORX" socket wrench, remove the "TORX" bolt, bush and hinge.

    2. B247673

      Remove the screw.

    3. Detach the claw and remove the cover.

  17. REMOVE REAR SEATBACK STAY COVER LH

    B238062

    1. Detach the 3 claws and remove the cover.

  18. REMOVE REAR SEATBACK STAY COVER RH

    1. B238063

      Detach the 3 claws and remove the cover.

  19. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY

    B238064

    1. Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts, 2 bushes and armrest.

    2. B238065

      Remove the bush.

  20. REMOVE NO. 2 CUP HOLDER ASSEMBLY RH

    B238066

    1. Remove the 2 cup holders.

  21. REMOVE REAR SEATBACK COVER

    1. B237641

      Using a screwdriver, detach the 4 claws and remove the cover.

      Tip:

      Tape the screwdriver tip before use.

  22. REMOVE REAR SEATBACK LOCK COVER

    B237735

    1. Using a moulding remover, detach the claw.

    2. Move the cover in the direction of the arrow to detach the clip and 2 guides and remove the cover.

  23. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY

    B238067

    1. Detach the 4 claws and 3 clips, and then remove the board.

  24. REMOVE REAR SEAT HEADREST SUPPORT

    B238068

    1. Detach the 4 claws and remove the 2 supports.

  25. REMOVE REAR NO. 1 SEAT NO. 2 SIDE PLATE

    1. B238069

      Remove the 2 screws.

    2. B238070

      Using a moulding remover, detach the 3 claws and remove the plate.

  26. REMOVE REAR SEAT LOCK ASSEMBLY RH

    B238072

    1. Detach the clamp and disconnect the wire.

    2. Remove the 2 bolts and lock.

  27. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH

    B247674

    1. Remove the 2 screws.

    2. Detach the claw and guide and remove the control lever.

  28. REMOVE REAR SEATBACK LOCK LEVER RH

    B247675

    1. Using a screwdriver, remove the E-ring.

    2. Remove the pin as shown in the illustration.

    3. Remove the lever and wire as a unit.

    4. Remove the wire from the lever.

  29. REMOVE CENTER NO. 2 SEATBACK COVER

    B238074

    1. Remove the screw.

    2. Detach the 2 claws and remove the cover.

  30. REMOVE REAR SEATBACK LOCK COVER RH

    B238025

    1. Remove the 2 screws.

    2. Detach the 2 guides and remove the cover.

  31. REMOVE REAR SEATBACK LOCK ASSEMBLY RH

    1. B247677

      Remove the 4 hog rings.

    2. B238081

      Remove the 2 bolts.

    3. While moving the release button in the direction of the arrow in the illustration, detach it from the grommet and remove the seatback lock.

  32. REMOVE REAR SEATBACK LOCK RELEASE BUTTON

    B238009C02

    *a

    Counterclockwise

    1. Remove the release button as shown in the illustration.

  33. REMOVE REAR SEATBACK STOP BUTTON GROMMET

    B238027

    1. Detach the 3 claws and remove the grommet.

  34. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    B238003

    1. Detach the 4 claws and remove the 2 supports.

  35. REMOVE SEAT BELT ANCHOR COVER CAP

    B238075C01

    *1

    Protective Tape

    1. Using a screwdriver, detach the 2 claws and 2 guides, and then remove the cap.

      Tip:

      Tape the screwdriver tip before use.

  36. REMOVE REAR SEAT SHOULDER BELT COVER

    B238077

    1. Remove the screw.

    2. Detach the 3 claws and remove the cover.

    3. Disconnect the outer belt from the cover.

  37. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

    B238078

    1. Remove the protector from the striker.

  38. REMOVE REAR SEAT LOCK STRIKER

    B238079

    1. Using a T45 "TORX" socket wrench, remove the striker.

  39. REMOVE SEATBACK COVER WITH PAD

    B247678C01

    *1

    Hook

    *2

    Hog Ring

    1. Remove the hog rings, detach the hook, and then remove the seatback cover with pad.

    2. Disconnect the outer belt from the seatback cover with pad.

  40. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH

    B247679

    1. Remove the hog rings and cover from the seatback pad.

  41. REMOVE REAR SEATBACK EDGE PROTECTOR

    1. Remove the protector from the seatback frame.

  42. REMOVE REAR SEAT SHOULDER BELT GUIDE

    B238085

    1. Detach the claw and guide, and then remove the belt guide.

  43. REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY

    Click hereClick here

  44. REMOVE REAR NO. 1 SEAT PROTECTOR LH

    B238087

    1. Detach the 2 claws and remove the protector.

  45. REMOVE REAR NO. 1 SEAT PROTECTOR

    B238086

    1. Detach the claw and remove the protector.