GLOW PLUG REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY RH


    1. B007T2L

      Move the front seat assembly fully forward.

    2. Remove the 2 bolts on the rear side of the seat.

    3. Move the front seat assembly to the rearmost position.

    4. Remove the 2 bolts on the front side of the seat.

    5. Move the front seat assembly to the center of the seat slide rail. Set the seatback in the upright position.

    6. Disconnect the front seat inner belt assembly connector.

    7. Remove the front seat assembly.

  2. REMOVE FRONT DOOR SCUFF PLATE RH

  3. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Turn back the carpet, and remove the engine service hole cover sub-assembly.

  4. REMOVE INTAKE AIR CONNECTOR SUB-ASSEMBLY


    1. Disconnect the ventilation hose.

    2. Disconnect the turbo pressure sensor connector.

    3. B007OBS

      Remove the bolt, 3 nuts, intake air connector and gasket.

  5. REMOVE INTAKE AIR CONNECTOR BRACKET


    1. B007UYZ

      Remove the 2 bolts and intake air connector bracket.

  6. REMOVE GLOW PLUG NO.1 CONNECTOR


    1. Remove the vehicle's side wire harness, glow plug screw grommets and nuts, and disconnect the glow plug No.1 connector.

  7. REMOVE GLOW PLUG ASSEMBLY


    1. Using a 12 mm deep socket wrench, remove the 4 glow plugs.