LIGHTING SYSTEM


  1. OUTLINE


    1. Exterior Light


      1. The exterior lights consist of the following:

        Figure 1. Front Lights

        B0082X8C02
        *A Models with Front Fog Light - -
        *1 Side Turn Signal Light Assembly *2 Headlight Assembly
        *3 Front Fog Light - -
        *a The illustrations shown are examples only. - -

        Figure 2. Headlight Assembly

        B0082T7C02
        *A Models with Bulb Type Front Turn Signal Light *B Models with LED Type Front Turn Signal Light
        *a Front Turn Signal Light *b Low Beam/High Beam
        *c Clearance Light/Daytime Running Light - -

        Figure 3. Rear Lights

        B0082VIC01
        *1 Center Stop Light Assembly *2 Rear Combination Light Assembly
        *3 Rear Light Assembly *4 License Plate Light Assembly

        Figure 4. Rear Light Assembly and Rear Combination Light Assembly

        B0082VLC01
        *A Models with Bulb Type Turn Signal Light *B Models with LED Type Turn Signal Light
        *C Models with Rear Fog Light - -
        *a Taillight *b Rear Side Marker Light
        *c Rear Turn Signal Light *d Stop Light
        *e Back-up Light *f Rear Fog Light
        *g Taillight/Stop Light - -

        Tech Tips

        The rear fog light is installed to the driver side of the vehicle.

    2. Daytime Running Light System


      1. The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.

    3. Light Auto Turn-off System


      1. The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, clearance lights, taillights, rear side marker lights or license plate lights on.

    4. Automatic Light Control System


      1. When the light control switch is in the AUTO position, the automatic light control sensor detects the ambient light level and automatically turns the headlights, clearance lights, taillights, rear side marker lights or license plate lights on or off accordingly.

      2. This system is controlled by the main body ECU (multiplex network body ECU).

    5. Automatic Headlight Beam Level Control System


      1. When the headlights are on, the automatic headlight beam level control system operates the headlight leveling motors in accordance with movement of the vehicle.

    6. Emergency Brake Signal


      1. The hazard warning lights flash automatically in the case of emergency braking to alert following drivers, thus helping to reduce rear-end accidents.

    7. Automatic High Beam System


      1. The automatic high beam system detects lights in front of the vehicle and automatically changes between high beams and low beams to support the driver during night driving.

    8. Lane Change Flasher System


      1. The lane change flasher system flashes the turn signal light a certain number of times when the turn signal switch is moved to the lane change position. By using the lane change flasher system when changing lanes, it is no longer necessary to hold the turn signal switch in the lane change position.

  2. SPECIFICATION

    Except Models for Australia
    Light Type Wattage
    Headlight Assembly LH/RH*1 Low Beam/High Beam LED x 1 29/34
    Front Turn Signal Light WY21W 21
    Clearance Light/Daytime Running Light LED x 8 0.7/7.2
    Headlight Assembly LH/RH*2 Low Beam/High Beam LED x 1 29/34
    Front Turn Signal Light LED x 11 10.3
    Clearance Light/Daytime Running Light LED x 12 1.1/18
    Side Turn Signal Light Assembly LED x 2 0.5
    Fog Light Assembly*3 LED x 2 5.9
    Rear Combination Light Assembly LH/RH*1 Taillight/Stop Light LED x 1 2.6/1
    Rear Side Marker Light LED x 1 1
    Rear Turn Signal Light WY21W 21
    Rear Light Assembly LH/RH*1 Back-up Light W16W 16
    Taillight LED x 2 1.3
    Rear Fog Light*4 LED x 3 1
    Rear Combination Light Assembly LH/RH*2 Taillight LED x 3 1.6
    Rear Side Marker Light LED x 1
    Taillight/Stop Light LED x 10 2.6
    Rear Turn Signal Light LED x 8 5.9
    Rear Light Assembly LH/RH*2 Taillight LED x 3 2.9
    Back-up Light LED x 3 1.8
    Rear Fog Light*4 LED x 2 1.4
    Center Stop Light Assembly LED x 8 0.7
    License Plate Light Assembly (LH/RH) LED x 1 0.3

    *1: Models with bulb type front/rear turn signal light

    *2: Models with LED type front/rear turn signal light

    *3: Models with front fog light

    *4: Models with rear fog light

    Tech Tips

    The rear fog light is installed to the driver side of the vehicle.

    Models for Australia
    Light Type Wattage
    Headlight Assembly LH/RH Low Beam/High Beam LED x 1 29/34
    Front Turn Signal Light LED x 11 10.3
    Clearance Light/Daytime Running Light LED x 12 1.1/18
    Side Turn Signal Light Assembly LED x 2 0.5
    Rear Combination Light Assembly LH/RH Taillight LED x 3 1.6
    Rear Side Marker Light LED x 1
    Taillight/Stop Light LED x 10 3.7
    Rear Turn Signal Light LED x 8 5.9
    Rear Light Assembly LH/RH Taillight LED x 3 2.9
    Back-up Light LED x 3 1.8
    Center Stop Light Assembly LED x 8 0.7
    License Plate Light Assembly (LH/RH) LED x 1 0.3

  3. PRECAUTION


    1. Ignition Switch Expressions


      1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Expression

        Ignition Switch

        (Position)

        Engine Switch

        (Condition)
        Ignition Switch off LOCK Off (LOCK)
        Ignition Switch ACC ACC On (ACC)
        Ignition Switch ON ON On (IG)
        Engine Start START On (Start)