MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   Tip:

   Perform "Air Flow Meter Learning Value Reset" after replacing the mass air flow meter sub-assembly.

   Click here

   1. Using a T20 "TORX" socket wrench, install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

      1.5 N*m

      15 kgf*cm

      13 in.*lbf

      Note:

      Avoid physical shock to the mass air flow meter sub-assembly.

   2. Connect the mass air flow meter sub-assembly connector.

2. PERFORM INITIALIZATION

   1. Perform "Air Flow Meter Learning Value Reset" after replacing the mass air flow meter sub-assembly.

      Click here