REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A005D6S

      Engage the claw.

    2. Connect the connector to install the rear combination light socket and wire sub-assembly.

  2. INSTALL REAR NO. 1 FOG LIGHT BULB (for LH Side)


    1. Install the rear No. 1 fog light blub to the rear combination light socket and wire sub-assembly.

    2. A005C7A

      Turn the rear combination light socket and wire sub-assembly with the rear No. 1 fog light blub in the direction indicated by the arrow shown in the illustration to connect them as a unit.

  3. INSTALL BACK-UP LIGHT BULB (for RH Side)


    1. Install the back-up light bulb to the rear combination light socket and wire sub-assembly.

    2. A0059RY

      Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.

  4. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

    2. A005D0P

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.

  5. INSTALL REAR COMBINATION LIGHT GASKET


    1. A005DEF

      Install a new rear combination light gasket.

  6. INSTALL REAR COMBINATION LIGHT BODY GASKET


    1. A005B4K

      Install 2 new rear combination light body gaskets.