OUTER REAR VIEW MIRROR GLASS REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR LH


    1. Push the upper part of the outer mirror surface and tilt it.

    2. A004OFCE01

      Apply protective tape to the lower part of the outer rear view mirror assembly LH with cover.

      Text in Illustration
      A004PF6 Protective Tape

    3. Using a moulding remover D, detach the 8 claws.

      Note

      Do not pull the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

    4. A004R0B

      Disconnect the connector and remove the outer mirror LH.