COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL COMBINATION METER ASSEMBLY

    1. E182625

      Connect the connector.

    2. Attach the clamp.

    3. E182624

      Attach the clip to install the combination meter.

    4. Install the 2 screws.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  3. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).