AUDIO AND VISUAL SYSTEM(w/o Navigation System) Display Signal Circuit between Multi-display and Radio Receiver

DTC Code DTC Name
Display Signal Circuit between Multi-display and Radio Receiver

DESCRIPTION

The display image signal from the multi-media module receiver assembly is sent to the multi-display assembly using a GVIF cable.

WIRING DIAGRAM

E245680E02

PROCEDURE

  1. CHECK GVIF CABLE CONNECTOR

    1. Check if the GVIF cable connector between the multi-media module receiver assembly and the multi-display assembly has any connection problems.

    2. Check that the screen display is normal.

      OK

      Screen display is normal.

    Result

    Proceed to

    OK

    NG
    OK

    USE SIMULATION METHOD TO CHECK

    Click hereClick here

    NG

  2. CHECK MULTI-DISPLAY ASSEMBLY

    1. Replace the multi-display assembly with a known good one.

      Click here

    2. Check that the screen display is normal.

      OK

      Screen display is normal.

    Result

    Proceed to

    OK

    NG
    OK

    END (MULTI-DISPLAY ASSEMBLY IS DEFECTIVE)

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click here