REAR BUMPER REMOVAL
PROCEDURE
REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)
-
*1
Screw A
*2
Screw B
Remove the 2 screws labeled B.
Remove the 3 screws labeled A and rear quarter panel mudguard LH.
-
REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)
Tip:Use the same procedure described for the LH side.
REMOVE REAR BUMPER COVER
-
Remove the 6 clips.
-
*1
Screw A
*2
Screw B
Remove the 2 screws labeled A and screw labeled B.
Tip:Use the same procedure to remove the screw on the other side.
-
Remove the 2 bolts.
-
*1
Protective Tape
Put protective tape around the rear bumper cover.
Detach the 10 claws.
-
REMOVE NO. 2 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR
Remove the 2 clips and No. 2 luggage compartment service cover protector.
REMOVE NO. 1 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR
Tip:Use the same procedure described for the LH side.
REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY
-
for Step Type:
Remove the 6 bolts and rear bumper reinforcement sub-assembly.
-
w/ TOYOTA Parking Assist-sensor System:
Remove the 6 bolts and rear bumper reinforcement sub-assembly.
-
for Standard Type:
Remove the 6 bolts and rear bumper reinforcement sub-assembly.
-
REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH
-
Remove the 3 bolts and rear bumper arm sub-assembly LH.
-
REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH
Tip:Use the same procedure described for the LH side.
REMOVE REAR BUMPER SIDE SUPPORT LH
-
Using a screwdriver, turn the clip 90° and remove the clip.
Remove the screw and rear bumper side support.
-
REMOVE REAR BUMPER SIDE SUPPORT RH
Tip:Use the same procedure described for the LH side.
REMOVE REAR BUMPER UPPER RETAINER LH
-
Using a screwdriver, turn the clip 90° and remove the clip and rear bumper upper retainer LH.
-
REMOVE REAR BUMPER UPPER RETAINER RH
Tip:Use the same procedure described for the LH side.