SFI SYSTEM(w/ Canister Pump Module), Diagnostic DTC:P060B
| DTC Code | DTC Name |
|---|---|
| P060B | Internal Control Module A/D Processing Performance |
MONITOR DESCRIPTION
This DTC is stored when a communication error occurs in the ECM.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
MIL |
Memory |
|---|---|---|---|---|---|
P060B |
Internal Control Module A/D Processing Performance |
An ECM main CPU communication error (1 trip detection logic). |
|
Comes on |
DTC stored |
MONITOR STRATEGY
Required Sensors/Components |
ECM |
Frequency of Operation |
Continuous |
CONFIRMATION DRIVING PATTERN
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the engine switch on (IG) and wait for 16 seconds or more.
CAUTION / NOTICE / HINT
Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.
PROCEDURE
READ OUTPUT DTC (DTC P060B)
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Clear the DTCs.
Powertrain > Engine and ECT > Clear DTCs
Turn the engine switch off and turn the GTS off.
Disconnect the GTS.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Wait 16 seconds or more.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Read the DTCs.
Powertrain > Engine and ECT > Trouble Codes
Result
Result
Proceed to
DTC is not output
A
DTC P060B is output
B
DTC P060B and P0327, P0328 are output
C