VANE PUMP (for 1GD-FTV) DISASSEMBLY


  1. SECURE VANE PUMP ASSEMBLY


    1. B007W97E01

      Using SST, secure the vane pump assembly in a vise.

      SST
      09630-00014   ( 09631-00132 )

  2. REMOVE SUCTION PORT UNION


    1. B007TH7

      Remove the bolt and suction port union.

    2. Remove the O-ring from the suction port union.

  3. REMOVE PRESSURE PORT UNION SUB-ASSEMBLY


    1. B007Q3K

      Remove the pressure port union sub-assembly and O-ring.

  4. REMOVE REAR VANE PUMP HOUSING


    1. B007USO

      Remove the 4 bolts and rear vane pump housing.

    2. Remove the O-ring from the rear vane pump housing.

  5. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates.

      Note

      Take care not to drop the vane pump plates.

    2. Remove the vane pump rotor.

  6. REMOVE VANE PUMP SHAFT WITH PULLEY


    1. B007TRP

      Using 2 screwdrivers, remove the snap ring from the vane pump shaft with pulley.

    2. Remove the vane pump shaft with pulley.

  7. REMOVE VANE PUMP CAM RING


    1. Remove the vane pump cam ring from the vane pump front housing.

  8. REMOVE FRONT VANE PUMP SIDE PLATE


    1. Remove the front vane pump side plate from the vane pump front housing.

    2. B007QUD

      Remove the O-ring from the front vane pump side plate.

    3. B007P5F

      Remove the O-ring from the front vane pump housing.

  9. REMOVE VANE PUMP HOUSING OIL SEAL


    1. B007T2QE01
      Text in Illustration
      *a Cloth

      Using a screwdriver and piece of cloth, pry out the vane pump housing oil seal.

      Note

      Be careful not to damage the front vane pump housing.