DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE

1. REMOVE TRANSFER ASSEMBLY

   Click hereClick here

2. REMOVE DRIVE SHAFT BEARING BRACKET

   Click hereClick hereClick here

3. REMOVE TRANSAXLE CASE OIL SEAL

   1. 

      *a	Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, pry out the front transmission case oil seal.

      Tip:

      Tape the screwdriver tip before use.

4. REMOVE FRONT DIFFERENTIAL CASE OIL SEAL

   1. 

      Using SST, remove the front differential case oil seal.

      09308-00010

      Note:

      Be careful not to damage the differential case.

5. INSTALL FRONT DIFFERENTIAL CASE OIL SEAL

   1. Coat the lip of a new front differential case oil seal with MP grease.

   2. 

      *a	21.5 to 22.5 mm (0.847 to 0.855 in.)

      Using SST and a hammer, tap in a new front differential case oil seal to the front transmission case.

      09950-70010

      09951-07200

      09649-17010

      Note:

      Do not damage the front differential case oil seal lip.

      Standard depth

      21.5 to 22.5 mm (0.847 to 0.855 in.)

6. INSTALL TRANSAXLE CASE OIL SEAL

   1. Coat the lip of a new transaxle case oil seal with MP grease.

   2. 

      *a	5.5 to 6.5 mm (0.217 to 0.255 in.)

      Using SST and a hammer, tap in a new transaxle case oil seal to the transaxle case.

      09710-30050

      09950-70010

      09951-07100

      Standard depth

      5.5 to 6.5 mm (0.217 to 0.255 in.)

      Note:

      Do not damage the front transaxle case oil seal lip.

7. INSTALL DRIVE SHAFT BEARING BRACKET

   Click hereClick hereClick here

8. INSTALL TRANSFER ASSEMBLY

   Click hereClick here