NAVIGATION SYSTEM(for Sedan) Display does not Dim when Light Control Switch is Turned ON

DTC Code DTC Name
Display does not Dim when Light Control Switch is Turned ON

PROCEDURE

  1. CHECK IMAGE QUALITY SETTING

    1. Turn the light control switch to the tail or head position.

    2. Check that the daytime screen setting on the display adjustment screen is set to on.

      Result

      Result

      Proceed to

      Daytime screen setting is set to on.

      A

      Daytime screen setting is set to off.

      B
    A

    CHANGE DAYTIME SCREEN SETTING TO OFF

    B

  2. CHECK VEHICLE SIGNAL (OPERATION CHECK)

    1. E225854

      Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.

      Click here

    2. Check that the display changes between ON and OFF according to the light control switch operation.

      OK

      Light Control Switch

      Display

      Tail or head

      ON

      Off

      OFF
      Tip:

      The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

    Result

    Proceed to

    OK

    NG
    OK

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

    Click here

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click here