| Propeller intermediate shaft assembly runout |
Maximum runout: 0.8 mm (0.0315 in.) |
| Propeller shaft assembly runout |
Maximum runout: 0.8 mm (0.0315 in.) |
| Propeller with center bearing shaft assembly |
Distance between the surface of the No. 1 center support bearing assembly and the surface of the cushion |
11.5 to 13.5 mm (0.453 to 0.531 in.) |
| No. 2 Joint Angle |
-0°21' +/- 30' |
| No. 3 Joint Angle |
1°25' +/- 33' |
| Adjusting Washer |
Thickness |
2.0 mm (0.0787 in.) |
| 4.5 mm (0.177 in.) |
| 6.5 mm (0.256 in.) |
| 9.0 mm (0.354 in.) |
| 11.0 mm (0.433 in.) |