FRONT BLOWER MOTOR REMOVAL

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  2. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. w/ PTC Heater:


      1. A005CBGE03
        Text in Illustration
        *A w/ PTC Heater
        *1 Quick Heater Connector Screw

        Remove the quick heater connector screw.

    2. Disengage the clamp and disconnect the connector.

    3. Remove the 3 screws and blower motor with fan sub-assembly.

      Note

      When removing the blower motor with fan sub-assembly, do not damage it or allow it to receive an impact.