СИСТЕМА БЛОКИРОВКИ СЕЛЕКТОРА


  1. FUNCTION OF MAIN COMPONENTS

    Component Function
    Shift Lock Solenoid Solenoid Locks the shift lever in P.
    P Detection Switch Detects when the shift lever is in P.
    Key Interlock Solenoid*1 Prohibits the key from being pulled out when the shift lever is not in P.
    Stop Light Switch Assembly Detects when the brake pedal is depressed.
    Ignition Switch Assembly*1 Detects the switch operation condition.
    Engine Switch (Push Start Switch)*2 Detects the switch operation condition.
    Shift Lock Control ECU Sub-assembly Controls the shift lock solenoid based on signals from each switch.
    Certification ECU (Smart Key ECU Assembly)*2 Sends the engine switch signal to the shift lock control ECU sub-assembly.

    *1: Models without smart entry and start system

    *2: Models with smart entry and start system

  2. SYSTEM CONTROL


    1. The shift lock control ECU sub-assembly uses the P detection switch to detect the shift lever position, and receives input signals from the stop light switch assembly and ignition switch. Upon receiving these signals, the shift lock control ECU sub-assembly turns on the shift lock solenoid and key interlock solenoid in order to release the shift lock and key interlock.

      B002MWGE01