OIL PUMP REMOVAL

PROCEDURE


  1. REMOVE CHAIN SUB-ASSEMBLY

    Click here

  2. REMOVE CRANKSHAFT TIMING SPROCKET


    1. A005CW2

      Remove the crankshaft timing sprocket.

  3. REMOVE NO. 2 CHAIN SUB-ASSEMBLY


    1. Temporarily tighten the crankshaft pulley with the crankshaft pulley bolt.

    2. A005EUVE02

      Using SST, remove the oil pump drive shaft sprocket nut while holding the crankshaft pulley.

      SST
      09213-58014   ( 91551-80840 )
      09330-00021

    3. Remove SST, the crankshaft pulley and crankshaft pulley bolt.

    4. A005AK5

      Remove the bolt, chain tensioner plate and chain damper spring.

    5. A005BXDE01
      Text in Illustration
      *1 Oil Pump Drive Gear
      *2 Oil Pump Drive Shaft Gear
      *3 No. 2 Chain Sub-assembly

      Remove the oil pump drive gear, oil pump drive shaft gear and No. 2 chain sub-assembly.

  4. REMOVE NO. 1 CRANKSHAFT POSITION SENSOR PLATE

    Click here

  5. REMOVE CRANKSHAFT TIMING GEAR KEY

    Click here

  6. REMOVE OIL PAN DRAIN PLUG

    Click here

  7. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY


    1. A005CCO

      Remove the 10 bolts and 2 nuts.

    2. A005CSJ

      Insert the blade of an oil pan seal cutter between the crankcase and oil pan. Cut through the sealer and remove the oil pan.

      Note

      Be careful not to damage the contact surfaces of the crankcase and oil pan.

  8. REMOVE OIL PUMP ASSEMBLY


    1. A005COJ

      Remove the 3 bolts and oil pump.