FRONT ACCELERATION SENSOR(for RHD) REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH (for LH Side)

    w/o Rear No. 2 Seat: Click here

    w/ Rear No. 2 Seat: Click here

  2. REMOVE COWL SIDE TRIM BOARD LH (for LH Side)

    Click here

  3. REMOVE INSTRUMENT PANEL GARNISH LH (for LH Side)

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LH Side)

    Tech Tips

    Use the same procedure as for the LHD.

    Click here

  5. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for LH Side)

    Tech Tips

    Use the same procedure as for LHD.

    Click here

  6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LH Side)

    Tech Tips

    Use the same procedure as for the LHD.

    Click here

  7. REMOVE ECU INTEGRATION BOX LH (for LH Side)

    Click here

  8. REMOVE FRONT DOOR SCUFF PLATE RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    w/o Rear No. 2 Seat: Click here

    w/ Rear No. 2 Seat: Click here

  9. REMOVE COWL SIDE TRIM BOARD RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RH Side)

    Click here

  11. REMOVE ACCELERATION SENSOR


    1. for LH Side:


      1. B005O5W

        Disconnect the connector from the acceleration sensor.

      2. Remove the 2 nuts and acceleration sensor.

        Note


        • Avoid any impact to the acceleration sensor.

        • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

    2. for RH Side:


      1. B005MG0

        Disconnect the connector from the acceleration sensor.

      2. Remove the 2 nuts and acceleration sensor.

        Note


        • Avoid any impact to the acceleration sensor.

        • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.