NOISE FILTER INSTALLATION

PROCEDURE

1. INSTALL RADIO SETTING CONDENSER (for Window Defogger)

   
   

   1. 

      Engage the claw to install a new terminal cover to the wire harness.

      Note

      
      

      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.

   2. 

      Install in this Direction

      Engage the 3 claws to install the new terminal cover with wire harness to a new condenser as shown in the illustration.

      Note

      
      

      • Do not use excessive force when inserting the terminal cover into the condenser.

      • If the terminal cover has been deformed during installation, replace the terminal, terminal cover and condenser with new ones.

   3. Engage the clamp to temporarily install a new radio setting condenser with wire harness.

   4. Install the new radio setting condenser with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL RADIO SETTING CONDENSER (for High Mounted Stop Light)

   
   

   1. 

      Engage the claw to install a new terminal cover to the wire harness.

      Note

      
      

      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.

      Tech Tips

      Use the same procedure for the other terminal cover.

   2. 

      Install in this Direction

      Engage the 6 claws to install 2 new terminal covers with wire harness to a new condenser as shown in the illustration.

      Note

      
      

      • Do not use excessive force when inserting the terminal covers into the condenser.

      • If a terminal cover has been deformed during installation, replace the terminal, terminal covers and condenser with new ones.

   3. 

      Install in this Direction

      Insert the cover as shown in the illustration and engage the claw.

   4. Engage the clamp to temporarily install the new radio setting condenser with wire harness.

   5. Install the new radio setting condenser with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

3. INSTALL INNER ROOF SIDE GARNISH LH

   Click here

4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH (for Fixed Seat Type)

   Click here

5. INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

   Click here

6. INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

   Click here

7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH (for Fold Down Seat Type)

   Click here

8. INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)

   Click here

9. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

   Click here

10. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Fold Down Seat Type)

    Click here

11. INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Reclining Seat Type)

    Click here

12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH (for Reclining Seat Type)

    Click here

13. INSTALL REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type)

    Click here

14. INSTALL REAR SEATBACK COVER (for Reclining Seat Type)

    Click here

15. INSTALL REAR SEAT CUSHION LOCK HOOK (for Reclining Seat Type)

    Click here

16. INSTALL REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)

    Click here

17. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Reclining Seat Type)

    Click here

18. INSTALL REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)

    Click here

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)

    for 2AR-FE:

    Click here

    for A25A-FKS:

    Click here

    for 2GR-FKS:

    Click here

20. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Rear Seat Side Airbag)

    Click here

21. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag)

    Click here