FRONT PASSENGER SIDE POWER WINDOW SWITCH INSPECTION

PROCEDURE

  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY

    1. B102935C01

      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      3 - 4

      Up

      Below 1 Ω

      1 - 2

      Up

      Below 1 Ω

      4 - 5

      Off

      Below 1 Ω

      1 - 2

      Off

      Below 1 Ω

      4 - 5

      Down

      Below 1 Ω

      1 - 3

      Down

      Below 1 Ω

      If the result is not as specified, replace the power window regulator switch assembly.