DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE

  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click hereClick here

  2. REMOVE DRIVE SHAFT BEARING BRACKET

    Click here

  3. REMOVE TRANSMISSION CASE OIL SEAL

    D025305E10

    1. Using SST, tap out the transmission case oil seal.

      09308-00010

  4. REMOVE TRANSAXLE CASE OIL SEAL

    C094266E08

    1. Using SST, tap out the transaxle case oil seal.

      09308-00010

  5. INSTALL TRANSMISSION CASE OIL SEAL

    D026133C02

    *a

    -0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

    1. Coat the lip of a new transmission case oil seal with MP grease.

    2. Using SST and a hammer, tap in the transmission case oil seal.

      09608-32010

      09950-70010

      09951-07200

      Standard depth

      -0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

      Note:

      Do not damage the lip of the transmission case oil seal.

  6. INSTALL TRANSAXLE CASE OIL SEAL

    C280487C01

    *a

    -0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

    1. Coat the lip of a new transaxle case oil seal with MP grease.

    2. Using SST and a hammer, tap in the transaxle case oil seal.

      09710-30050

      09950-70010

      09951-07200

      Standard depth

      -0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

      Note:

      Do not damage the lip of the transaxle case oil seal.

  7. INSTALL DRIVE SHAFT BEARING BRACKET

    Click here

  8. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click hereClick here