AUDIO AND VISUAL SYSTEM(w/o Multi-display), Diagnostic DTC:CB-10,CB-11 and CB-12
| DTC Code | DTC Name |
|---|---|
| CB-10 | System Microcomputer Malfunction |
| CB-11 | Media Interface Microcomputer Malfunction |
| CB-12 | CD-LSI Malfunction |
DESCRIPTION
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
CB-10 |
System Microcomputer Malfunction |
A system microcomputer malfunction. |
|
CB-11 |
Media Interface Microcomputer Malfunction |
A media interface microcomputer malfunction. |
|
CB-12 |
CD-LSI Malfunction |
A CD-LSI (large scale integration) malfunction. |
|
CAUTION / NOTICE / HINT
After the inspection is completed, clear the DTCs.
PROCEDURE
REPLACE USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the stereo jack adapter.
Turn the engine switch off.
Tip:When one of these DTCs has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the stereo jack adapter.
Result
Result
NEXT
CHECK FOR DTC
Clear the DTCs.
Check for DTCs and check if the same DTC occurs again.
Tip:If DTCs are output frequently, replace the multi-media interface ECU.
OK
Malfunction disappears.
Result
Result
OK
NG
OK END (USB DEVICE OR "iPod" WAS DEFECTIVE)