KNOCK SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tip:

Perform "Inspection After Repairs" after replacing the knock sensor.

PROCEDURE

  1. INSTALL KNOCK SENSOR

    1. A196019C01

      *a

      Top

      *b

      Front of Engine

      Install the knock sensor with the bolt so that the knock sensor is angled as shown in the illustration.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

      Note:

      The acceptable installation angle of the sensor is between 7° upward and 10° downward from the horizontal position.

      Tip:

      Perform "Inspection After Repairs" after replacing the knock sensor.

    2. Connect the knock sensor connector.

  2. INSTALL INTAKE MANIFOLD

    Click hereClick here