UNDER BODY REFERENCE VALUES THREE-DIMENSIONAL DISTANCE

Tip:

In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Table 1. Measuring Point Name
Symbol	Name	Hole Diameter mm (in.)
A	Front Bumper Lower Absorber Installation Bolt	M6 (0.24)
B, b	Front Side Member Standard Hole	φ18 (0.71)
C, c	Front Suspension Crossmember Installation Bolt	M12 (0.47)
D, d	Front Suspension Crossmember Installation Bolt	M10 (0.39)
E, e	Front Side Inner Rear Member Standard Hole	φ18 (0.71)