REAR CROSSING TRAFFIC ALERT BUZZER REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read precaution thoroughly before servicing.

    Click here

    B006BC1

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


    1. Disconnect the cable from the negative (-) battery terminal.

      Click here

      CAUTION:


      • Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

      • If the airbag deploys for any reason, it may cause a serious accident.

      B006BY6

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

  4. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Fixed Seat Type:

      Click here

  5. REMOVE BLIND SPOT MONITOR BUZZER


    1. B006ELY

      Using a clip remover, detach the clamp and remove the blind spot monitor buzzer.

    2. Disconnect the connector.