KINETIC DYNAMIC SUSPENSION SYSTEM, Diagnostic DTC:C1884/84

DTC Code DTC Name
C1884/84 Steering Angle Sensor Circuit Malfunction

DESCRIPTION

The stabilizer control ECU receives steering angle information from the steering angle sensor via CAN communication.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1884/84

Steering Angle Sensor Circuit Malfunction

Either condition is met:

  • The stabilizer control ECU receives an error signal from the steering sensor for 5 seconds.

  • A steering angle sensor BAT terminal open circuit malfunction signal is continuously received for 5 seconds.

  • Steering angle sensor

  • Steering angle sensor circuit

  • Stabilizer control ECU

CAUTION / NOTICE / HINT

Tip:

If DTC U0126/71 and C1884/84 are output at the same time, perform the inspection necessary for the CAN communication system first (Click here).

PROCEDURE

  1. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)

    1. Check for steering angle sensor malfunction DTCs.

      Click hereClick here

      Chassis > ABS/VSC/TRC > Trouble Codes

      Result

      Result

      Proceed to

      DTC is not output

      A

      DTC is output

      B
    B

    GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

    Click hereClick here

    A

  2. CHECK DTC

    1. Clear the DTCs.

      Click here

      Chassis > KDSS > Clear DTCs

    2. Perform a road test.

    3. Check for DTCs.

      Click here

      Chassis > KDSS > Trouble Codes

      Result

      Result

      Proceed to

      DTC is not output

      A

      DTC is output

      B
    A

    USE SIMULATION METHOD TO CHECK

    Click hereClick hereClick here

    B

    REPLACE STABILIZER CONTROL ECU

    Click here