UPPER INSTRUMENT PANEL(for Sedan) REASSEMBLY

PROCEDURE

1. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH

   1. Install the No. 1 defroster nozzle garnish with the 8 screws <B>.

      

2. INSTALL NO. 1 SIDE DEFROSTER NOZZLE

   1. 

      Engage the 5 claws to install the No. 1 side defroster nozzle.

3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE

   Tip:

   Use the same procedure as for the No. 1 side defroster nozzle.

4. INSTALL NO. 1 INSTRUMENT PANEL CUSHION

   1. Install a new No. 1 instrument panel cushion as shown in the illustration.

      

      *a

      Marking

      -

      -

      Tip:

      Install the No. 1 instrument panel cushion so that it is within the standard dimensions shown in the illustration.

      Table 1. Standard Dimension

      Area	Dimension
      A	0 to 10 mm (0 to 0.394 in.)

5. INSTALL NO. 2 INSTRUMENT PANEL WIRE

   1. 

      Engage the 7 clamps to install the No. 2 instrument panel wire.

6. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

   Click here

7. INSTALL NO. 2 INSTRUMENT PANEL CUSHION

   1. for LHD:

      1. Using hot-melt glue, install a new No. 2 instrument panel cushion.

         

         *a

         Marking

         *b

         Hot-melt Glue Application Location

         Tip:

         Install the No. 2 instrument panel cushion so that it is within the markings shown in the illustration.

         Table 2. Standard Dimension

         Area	Dimension
         A	35 mm (1.3780 in.)
         B	45 mm (1.7717 in.)
         C	68 mm (2.6772 in.)
         D	35 mm (1.3780 in.)
         E	30 mm (1.1811 in.)
         F	25 mm (0.9843 in.)

   2. for RHD:

      1. Using hot-melt glue, install a new No. 2 instrument panel cushion.

         

         *a

         Marking

         *b

         Hot-melt Glue Application Location

         Tip:

         Install the No. 2 instrument panel cushion so that it is within the markings shown in the illustration.

         Table 3. Standard Dimension

         Area	Dimension
         A	25 mm (0.9843 in.)
         B	30 mm (1.1811 in.)
         C	50 mm (1.9685 in.)
         D	38 mm (1.4961 in.)
         E	45 mm (1.7717 in.)
         F	35 mm (1.3780 in.)

8. INSTALL INSTRUMENT CLUSTER FINISH PANEL RETAINER

   1. 

      Install the instrument cluster finish panel retainer with the 4 screws <B>.

9. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

   1. 

      Install the center instrument panel register assembly with the 7 screws <B>.

   2. 

      Connect the connector.

10. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)

    Click here

11. INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)

    Click here

12. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    Click hereClick here

13. INSTALL NO. 2 HEATER TO REGISTER DUCT

    1. 

       Install the No. 2 heater to register duct with the 3 screws <B>.

14. INSTALL NO. 1 HEATER TO REGISTER DUCT

    1. 

       Install the No. 1 heater to register duct with the 4 screws <B>.

15. INSTALL DEFROSTER NOZZLE ASSEMBLY

    1. 

       Engage the 6 guides as shown in the illustration.

    2. 

       Install the defroster nozzle assembly with the 3 screws <B>.