ULTRASONIC SENSOR(for Hatchback Rear Side) REMOVAL

PROCEDURE

  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 1 ULTRASONIC SENSOR

    Tip:

    Use the same procedure for all No. 1 ultrasonic sensors.

    1. Disengage the clamp.

    2. Disconnect the connector.

    3. E320932

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

      Tip:

      This illustration is for the LH back or corner. The orientation for the RH back and corner is the opposite of the LH back or corner.

  3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tip:

    Use the same procedure for all No. 1 ultrasonic sensor retainers.

    1. E320934

      Remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.

      Tip:

      This illustration is for the LH back or corner. The orientation for the RH back and corner is the opposite of the LH back or corner.

    2. Remove the old double-sided tape from the rear bumper assembly.