CRANKSHAFT POSITION SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE ENGINE UNDER COVER NO.1 (w/ Engine Under Cover No.1 and Air Conditioning)

  3. REMOVE FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type, w/ Air Conditioning)

    Tech Tips

    Use the same procedures described for the LH side. Click here

  4. REMOVE FRONT SEAT ASSEMBLY RH (for Low-back Seat Type, w/ Air Conditioning)

    Tech Tips

    Use the same procedures described for the LH side. Click here

  5. REMOVE FRONT DOOR SCUFF PLATE RH (w/ Air Conditioning)

  6. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY (w/ Air Conditioning)


    1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover sub-assembly.

  7. REMOVE OIL LEVEL GAUGE GUIDE (w/ Air Conditioning System)


    1. B007UB4E01

      Remove the bolt and gauge guide.

  8. REMOVE FAN & GENERATOR V BELT (w/ Air Conditioning)


    1. B007UGEE01

      Use the hexagon-shaped part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the drive belt. Then remove the drive belt.

      Note

      When removing the drive belt, do not use the idle pulley's bolt.

      Tech Tips

      After removing the drive belt, move the tensioner upward to the maximum amount.

  9. SEPARATE COMPRESSOR AND MAGNETIC CLUTCH (w/ Air Conditioning)


    1. Disconnect the compressor connector.

    2. B007R72E02

      Remove the 4 bolts and disconnect the compressor from the engine.

      Tech Tips

      Disconnect the compressor with the low pressure hose and high pressure hose stuck by suspended from the rope.

    3. Support the cooler compressor securely.

  10. REMOVE COMPRESSOR MOUNTING BRACKET NO.1 (w/ Air Conditioning)


    1. B007OJI

      Remove the 5 bolts and compressor mounting bracket No.1.

  11. REMOVE CRANKSHAFT POSITION SENSOR


    1. B007OK3

      Disconnect the crankshaft position sensor connector and the 2 wire harness clamps.

    2. B007PRT

      Remove the bolt and crankshaft position sensor.