HEADLIGHT LEVELING ECU INSTALLATION

PROCEDURE

1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

   
   

   1. Engage the guide.

   2. Install the headlight leveling ECU assembly with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   3. Connect the connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

   Click here

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for RHD)

   Tech Tips

   Use the same procedure as for LHD Click here.

4. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   Click here

5. ADJUST HEADLIGHT AIMING

   Click here