BRAKE MASTER CYLINDER (w/ VSC) REMOVAL

Note

Release the vacuum from the booster by depressing the brake pedal several times. Then remove the brake master cylinder sub-assembly from the brake booster assembly.


  1. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

    A01DYISE01

    1. for Manual Transmission:

      Disconnect the clutch reservoir tube from the master cylinder reservoir.

    2. Disconnect the brake fluid level warning switch connector.

    3. Using a union nut wrench, disconnect the 4 brake lines from the master cylinder and brake tube way.

    4. A01DZ73E01

      Remove the 2 nuts and brake tube way.

    5. Pull out the master cylinder from the brake booster.

    6. Remove the O-ring from the master cylinder.