BLACK OUT TAPE(for Rear Door) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING

    Click here

  2. REMOVE NO. 2 BLACK OUT TAPE (for Hatchback, Wagon)

    1. Using a heat light, heat the vehicle body and No. 2 black out tape.

      Table 1. Heating Temperature

      Item

      Temperature

      Vehicle Body and No. 2 Black Out Tape

      40 to 60°C (104 to 140°F)
      Note:

      Do not heat the vehicle body or No. 2 black out tape excessively.

    2. B329311

      Pull back on one of the ends of the No. 2 black out tape to remove it.

      Tip:

      When pulling on the No. 2 black out tape, pull it parallel to the vehicle body.

  3. REMOVE NO. 2 BLACK OUT TAPE (for Sedan)

    1. Using a heat light, heat the vehicle body and No. 2 black out tape.

      Table 2. Heating Temperature

      Item

      Temperature

      Vehicle Body and No. 2 Black Out Tape

      40 to 60°C (104 to 140°F)
      Note:

      Do not heat the vehicle body or No. 2 black out tape excessively.

    2. B350923

      Pull back on one of the ends of the No. 2 black out tape to remove it.

      Tip:

      When pulling on the No. 2 black out tape, pull it parallel to the vehicle body.