LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      ACC SW Engine switch on (ACC) signal OFF or ON

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 "ON" is also displayed for this item when the engine switch is on (IG).
      IG SW Engine switch on (IG) signal OFF or ON

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 "OFF" is also displayed for this item when the engine switch is on (ACC).
      RR Door Courtesy SW Rear door courtesy light switch assembly RH signal OFF or ON

      OFF: Rear door RH closed

      ON: Rear door RH open

      		 -
      RL Door Courtesy SW Rear door courtesy light switch assembly LH signal OFF or ON

      OFF: Rear door LH closed

      ON: Rear door LH open

      		 -
      FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch assembly RH signal OFF or ON

      OFF: Front door RH closed

      ON: Front door RH open

      		 -
      FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch assembly LH signal OFF or ON

      OFF: Front door LH closed

      ON: Front door LH open

      		 -
      Dome Light DOOR SW Map light sub-assembly (door switch) signal OFF or ON

      OFF: Map light sub-assembly (door switch) off

      ON: Map light sub-assembly (door switch) on

      		 -
      Dome Light SW Map light sub-assembly (room light switch) signal OFF or ON

      OFF: Map light sub-assembly (room light switch) off

      ON: Map light sub-assembly (room light switch) on

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch signal OFF or ON

      OFF: Rear door RH unlocked

      ON: Rear door RH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch signal OFF or ON

      OFF: Rear door LH unlocked

      ON: Rear door LH locked

      		 -
      Rear Room Light Switch Spot light assembly (door switch) signal OFF or ON

      OFF: Spot light assembly (door switch) off

      ON: Spot light assembly (door switch) on

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus:


      1. Body Electrical / Main Body / Active Test.

      2. Body Electrical / Front Left Door / Active Test.

      3. Body Electrical / Front Right Door / Active Test.

      4. Body Electrical / Rear Left Door / Active Test.

      5. Body Electrical / Rear Right Door / Active Test.

      6. Body Electrical / Rear Left Seat / Active Test.

      7. Body Electrical / Rear Right Seat / Active Test.

      8. Body Electrical / Entry&Start / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Illuminated Entry System Turns on the lights that are controlled by the illuminated entry system* OFF or ON Perform the Active Test with DOOR switch in the map light sub-assembly and spot light assembly turned on.
      Rear Side Buckle Light Rear seat buckle illumination light OFF or ON w/o Rear Power Seat System
      Fr Foot Light Interior illumination light assembly (footwell light) OFF or ON -
      Relay for Interior Light Auto Cut Function DOME CUT D relay OFF or ON

      When performing this Active Test, turn all the interior lights on.


      • OFF: DOME CUT D relay on (interior lights turn on)

      • ON: DOME CUT D relay off (interior lights turn off)
      Interior Illumination Light2 Multi-display (interior illumination light assembly) OFF or ON

      Preconditions for using the Active Test to check dimmer controlled illumination:


      • Start the engine.

      • Shift lever is in any position other than P.
      Dimmer Signal Outputs night mode (dimmer signal) OFF or ON -

      • *: Refer to Operation Check for the lights that are controlled by the illuminated entry system.

        Click here


      Body Electrical > Front Left Door > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Inside Handle Light Front door trim board sub-assembly LH (front door inside handle illumination) ON or OFF -
      Door Illumination 1 Front door trim board sub-assembly LH (ornament illumination) ON or OFF -
      Door Illumination 2 Front door trim board sub-assembly LH (armrest illumination) ON or OFF -

      Body Electrical > Front Right Door > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Inside Handle Light Front door trim board sub-assembly RH (front door inside handle illumination) ON or OFF -
      Door Illumination 1 Front door trim board sub-assembly RH (ornament illumination) ON or OFF -
      Door Illumination 2 Front door trim board sub-assembly RH (armrest illumination) ON or OFF -

      Body Electrical > Rear Left Door > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Inside Handle Illumination Rear door trim board sub-assembly LH (rear door inside handle illumination) ON or OFF -
      Door Illumination 1 Rear door trim board sub-assembly LH (ornament illumination) ON or OFF -
      Door Illumination 2 Rear door trim board sub-assembly LH (armrest illumination) ON or OFF -

      Body Electrical > Rear Right Door > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Inside Handle Illumination Rear door trim board sub-assembly RH (rear door inside handle illumination) ON or OFF -
      Door Illumination 1 Rear door trim board sub-assembly RH (ornament illumination) ON or OFF -
      Door Illumination 2 Rear door trim board sub-assembly RH (armrest illumination) ON or OFF -

      Body Electrical > Rear Left Seat > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Buckle Lighting Rear inner seat belt assembly LH (rear seat buckle illumination light) OFF or ON w/ Rear Power Seat System

      Body Electrical > Rear Right Seat > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Buckle Lighting Rear inner seat belt assembly (rear seat buckle illumination light) OFF or ON w/ Rear Power Seat System

      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Power/Engine SW Light Engine switch illumination OFF or ON -