SEAT BELT WARNING LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL TELLTALE LIGHT ASSEMBLY (SEAT BELT WARNING LIGHT)

    1. Connect the connector.

    2. Attach the claw and 2 clips to install the telltale light assembly (seat belt warning light).

  2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick hereClick here