YAW RATE AND ACCELERATION SENSOR INSTALLATION

PROCEDURE

1. INSTALL YAW RATE AND ACCELERATION SENSOR

   
   

   1. Install the yaw rate and acceleration sensor with the 2 bolts.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      
      

      • Do not damage the yaw rate and acceleration sensor.

      • Make sure that the yaw rate and acceleration sensor is installed securely.

      • Do not use dropped or damaged parts.

      • Keep the contact surfaces of the yaw rate and acceleration sensor and the body free of foreign matter.

      • Make sure that the sensor is facing the correct direction.

   2. Connect the yaw rate and acceleration sensor connector.

      Note

      Make sure that the yaw rate and acceleration sensor connector is connected securely.

2. INSTALL HV BATTERY

   Click here

3. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

   Click here