COOLING FAN SWITCH REMOVAL


  1. DRAIN ENGINE COOLANT

    CAUTION:

    Do not remove the radiator cap sub-assembly while the engine assembly and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Connect a hose with an inside diameter of 9 mm (0.354 in.) to the radiator drain cock.

    2. Loosen the radiator drain cock plug.

      B007W5YE03
      Text in Illustration
      *1 Bleeder Plug *2 Radiator Cap Sub-assembly
      *3 Radiator Reserve Tank Assembly *4 Cylinder Block Drain Cock Plug
      *5 Radiator Drain Cock Plug - -

    3. Remove the radiator cap sub-assembly.

    4. Loosen the cylinder block drain cock plug, and drain the engine coolant.

    5. Tighten the radiator drain cock plug.

    6. Tighten the cylinder block drain cock plug.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

    7. Disconnect the hose from the radiator drain cock.

  2. REMOVE COOLING FAN SWITCH


    1. B007SCY

      Disconnect the cooling fan switch connector.

    2. Using a 19 mm deep socket wrench, remove the cooling fan switch and gasket.