PCV VALVE REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE V-BANK COVER


    1. Remove the 2 nuts and cover.

  3. REMOVE INTAKE AIR SURGE TANK


    1. A01E06TE01

      Disconnect the No. 5 water by-pass hose.

    2. A01E1BHE01

      Disconnect the No. 4 water by-pass hose.

    3. A01DZPTE01

      Disconnect the fuel vapor feed hose assembly.

    4. A01DWN0E01

      Disconnect the ventilation hose.

    5. A01E259E01

      Disconnect the 2 VSV connectors.

    6. Disconnect the throttle motor connector.

    7. Remove the 3 wire harness clamps and hose clamp.

    8. A01E0MAE01

      Remove the 3 upper bolts, which are used to secure the 2 surge tank stays and throttle body bracket.

    9. A01E2CQE01

      Using an 8 mm hexagon wrench, remove the 4 bolts.

    10. Remove the 2 nuts, intake air surge tank and gasket.

  4. REMOVE VENTILATION VALVE SUB-ASSEMBLY

    A01DZGX

    1. Loosen the hose clamp and disconnect the ventilation hose from the valve.

    2. Remove the valve.