CLUTCH PEDAL SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL


    1. B007R8L

      Using a clip remover, remove the 2 clips.

    2. Detach the 4 clips and remove the instrument panel finish lower.

    3. Disconnect each connector.

    4. B007TXW

      Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. B007SZA

      Using a clip remover, remove the 2 clips

    2. Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.

  4. REMOVE PARKING BRAKE HOLE COVER


    1. B007PNV

      Detach the 6 claws and remove the parking brake hole cover.

    2. Disconnect each connector.

  5. REMOVE SHIFT LEVER KNOB


    1. B007VNGE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Turn the shift lever knob in the direction indicated by the arrow and remove it.

  6. REMOVE SHIFTING HOLE COVER ASSEMBLY


    1. B007Q3UE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      for Manual Transmission:

      Detach the 6 claws and remove the shifting hole cover assembly.

    2. for Automatic Transmission:

      Detach the 8 claws and remove the shifting hole cover assembly.

  7. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. B007VIUE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Detach the 8 claws and remove the instrument panel finish panel lower center.

  8. REMOVE NO. 1 AIR DUCT


    1. B007QA6E01

      Remove the clip.

    2. Release the 2 claws and remove the air duct No.1.

  9. REMOVE CLUTCH SWITCH ASSEMBLY


    1. Disconnect the clutch switch connector.

    2. B007Q34

      Remove the clutch switch assembly.