HEADUP DISPLAY SWITCH REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Click here.

2. REMOVE DECK BOARD ASSEMBLY

   Click here

3. REMOVE NO. 1 DECK BOARD

   Click here

4. REMOVE NO. 2 DECK BOARD

   Click here

5. REMOVE REAR DECK FLOOR BOX

   Click here

6. REMOVE DECK FLOOR BOX RH

   Click here

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

8. REMOVE INTEGRATION CONTROL AND PANEL

   Tech Tips

   Use the same procedure as for LHD.

   Click here

9. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL

   Tech Tips

   Use the same procedure as for LHD.

   Click here

10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Tech Tips

    Use the same procedure as for LHD.

    Click here

11. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Tech Tips

    Use the same procedure as for LHD.

    Click here

12. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

    Tech Tips

    Use the same procedure as for LHD.

    Click here

13. REMOVE HEADUP DISPLAY SWITCH ASSEMBLY

    
    

    1. 

       Disengage the 4 claws and remove the headup display switch assembly.