BLOWER UNIT (for Manual Air Conditioning System) REASSEMBLY


  1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. A01E13RE01

      w/o PTC Heater:

      Disconnect the 2 connectors and detach the 2 clamps and wire harness.

    2. w/ PTC Heater:

      Disconnect the 4 connectors and detach the 3 clamps and wire harness.

      Text in Illustration
      *A w/o PTC Heater
      *B w/ PTC Heater
    3. A01DYQC

      Remove the 3 screws and blower motor with fan sub-assembly.

  2. INSTALL BLOWER RESISTOR

    A01E1R9

    1. Disconnect the connector.

    2. Remove the 2 screws and blower resistor.

  3. INSTALL CLEAN AIR FILTER


    1. Install the clean air filter.

    2. Attach the claw to install the air filter case.

  4. INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


    1. Attach the 3 claws to install the air inlet damper control cable sub-assembly.