TRANSMISSION CONTROL CABLE ADJUSTMENT

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • B008MC4

        Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  3. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  4. ADJUST SHIFT LEVER POSITION


    1. for TMMT Made:


      1. A001SX8C02
        *1 Adjuster Case
        *2 Stopper

        Turn the stopper of the adjuster case in the direction shown by the arrow.

      2. A001WQ3C02
        *1 Adjuster Case
        *2 Lock Piece

        Using a precision screwdriver, pull out the lock piece of the adjuster case.

      3. Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.

      4. A001SRQC02
        *1 Adjuster Case
        *2 Lock Piece

        Push in the lock piece of the adjuster case to lock it.

      5. A001W1SC02
        *1 Adjuster Case
        *2 Stopper

        Turn the stopper of the adjuster case in the direction shown by the arrow.

        Note

        If the cover is not moved far enough, it will not engage with the lock piece, the cable rod will not be able to lock, and reliable shift operation will not be possible.

    2. for TMC Made:


      1. A001VZ1C01
        *1 Adjuster Case
        *2 Cover

        Slide the cover in the direction shown by the arrow.

      2. A001YF9C01
        *1 Adjuster Case
        *2 Lock Piece

        Using a precision screwdriver, pull up the lock piece.

      3. A001UQ7C06
        *1 Cable Rod

        Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.

      4. A001T4RC01
        *1 Adjuster Case
        *2 Lock Piece

        Push in the lock piece to lock it.

      5. A001YEKC01
        *1 Adjuster Case
        *2 Cover

        Slide the cover in the direction shown by the arrow.

        Note

        If the cover is not moved far enough, it will not engage with the lock piece, the cable rod will not be able to lock, and reliable shift operation will not be possible.

  5. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  7. INSPECT SHIFT LEVER POSITION

    Click here