BATTERY CURRENT SENSOR INSTALLATION

PROCEDURE

1. INSTALL BATTERY STATE SENSOR ASSEMBLY

   1. Engage the 2 claws to install the battery state sensor assembly to the battery state sensor holder.

   2. Engage the clamp and connect the battery state sensor assembly connector.

   3. Install the battery state sensor assembly to the battery and tighten the nut.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

   4. Connect the engine wire to the battery state sensor assembly with the nut.

      7.6 N*m

      77 kgf*cm

      67 in.*lbf

      Note:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click hereClick hereClick hereClick here