BACK DOOR REASSEMBLY

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart.

Click here

PROCEDURE

  1. INSTALL BACK DOOR PANEL CUSHION

    1. Attach the 2 claws to install 2 new back door panel cushions.

  2. INSTALL BACK DOOR DAMPER STAY LOWER BRACKET LH (w/o Power Back Door)

    Click here

  3. INSTALL BACK DOOR DAMPER STAY LOWER BRACKET RH (w/o Power Back Door)

    Tip:

    Use the same procedure as for the LH side.

  4. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET LH (w/o Power Back Door)

    Click here

  5. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET RH (w/o Power Back Door)

    Tip:

    Use the same procedure as for the LH side.

  6. INSTALL BACK DOOR STAY ASSEMBLY LH (w/o Power Back Door)

    Click here

  7. INSTALL BACK DOOR STAY ASSEMBLY RH (w/o Power Back Door)

    Tip:

    Use the same procedure as for the LH side.

  8. INSTALL POWER BACK DOOR UNIT ASSEMBLY SET LH (w/ Power Back Door)

    Click here

  9. INSTALL POWER BACK DOOR UNIT ASSEMBLY SET RH (w/ Power Back Door)

    Tip:

    Use the same procedure as for the LH side.

  10. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

    Click here

  11. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  12. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Television Camera)

    Click here

  13. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  14. INSTALL LOWER BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  15. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  16. INSTALL REAR WASHER NOZZLE SUB-ASSEMBLY

    Click here

  17. INSTALL REAR SPOILER

    Click here

  18. INSTALL BACK DOOR GLASS CHANNEL LH

    Tip:

    When installing the back door glass channel, heat the vehicle body using a heat light.

    Standard

    Item

    Temperature

    Vehicle Body

    40 to 60°C (104 to 140°F)
    Note:

    Do not heat the vehicle body excessively.

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door glass channel LH.

      1. Using a heat light, heat the vehicle body.

      2. Remove the peeling paper from the face of the back door glass channel LH.

        Tip:

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door glass channel LH.

        Tip:

        Press the back door glass channel LH firmly to install it.

  19. INSTALL BACK DOOR GLASS CHANNEL RH

    Tip:

    Use the same procedure as for the LH side.

  20. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  21. INSTALL REAR LIGHT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  22. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  23. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

    Tip:

    Use the same procedure as for the LH side.

  24. INSTALL REAR WIPER MOTOR ASSEMBLY

    Click here

  25. INSTALL NO. 1 REAR WIPER LINK PIVOT WASHER

    Click here

  26. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY

    Click here

  27. INSTALL REAR WIPER ARM COVER

    Click here

  28. INSTALL MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)

    Click here

  29. INSTALL WIRELESS DOOR LOCK BUZZER (w/ Power Back Door)

    Click here

  30. INSTALL BACK DOOR LOCK ASSEMBLY

    Click here

  31. INSTALL DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)

    Click here

  32. INSTALL DOOR PULL HANDLE

    1. Attach the 4 claws to install the door pull handle.

  33. INSTALL BACK DOOR NO. 1 SERVICE HOLE COVER

    1. Attach the 4 claws and 4 guides to install the back door No. 1 service hole cover.

  34. INSTALL BACK DOOR NO. 2 SERVICE HOLE COVER

    1. Attach the 2 claws and 2 guides to install the back door No. 2 service hole cover.

  35. INSTALL BACK DOOR SERVICE HOLE COVER LH

    1. Attach the 2 claws and 2 guides to install the back door service hole cover LH.

  36. INSTALL BACK DOOR SERVICE HOLE COVER RH

    Tip:

    Use the same procedure as for the LH side.

  37. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    1. Attach the 13 clips to install the back door trim board assembly.

  38. INSTALL BACK DOOR SIDE GARNISH LH

    1. Attach the 2 claws and 2 clips to install the back door side garnish LH.

  39. INSTALL BACK DOOR SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  40. INSTALL BACK DOOR CENTER GARNISH

    1. Attach the 4 claws and 4 clips to install the back door center garnish.

  41. ADJUST REAR TELEVISION CAMERA ASSEMBLY

    1. w/ Parking Assist Monitor System:

      1. Calibration (Click here)

    2. w/ Panoramic View Monitor System:

      1. Initialization (Click here)

      2. Calibration (Click here)