PERSONAL LIGHT INSPECTION

PROCEDURE

1. INSPECT MAP LIGHT ASSEMBLY

   
   

   1. Inspect the map light sub-assembly.

      
      

      1. Apply battery voltage to the connector and check the light illumination condition.

         

         *a

         Component without harness connected (Map Light Assembly)

         -

         -

         OK
         Tester Connection Switch Condition Specified Condition N7-19 (+B) - Battery positive (+) N7-18 (DOME) - Battery positive (+) N7-22 (GND) - Battery negative (-) Map light switch LH ON Map light LH illuminates Map light switch RH ON Map light RH illuminates

         Tech Tips

         The map light switch is a capacitive touch switch. Therefore, the illumination turns on or off each time the lens around the light emitting area is touched.

         If the result is not as specified, replace the map light assembly.

      2. Inspect the DOOR switch indicator.

         Apply battery voltage to the connector and check the light illumination condition.

         

         *a

         Component without harness connected (Map Light Assembly)

         -

         -

         OK
         Tester Connection Switch Condition Specified Condition N7-19 (+B) - Battery positive (+) N7-18 (DOME) - Battery positive (+) N7-22 (GND) - Battery negative (-) DOOR switch ON DOOR switch indicator illuminates

         Tech Tips

         Turns off for 10 seconds according to a communication stop judgment during inspection.

         If the result is not as specified, replace the map light assembly.

      3. Inspect the illumination.

         Apply battery voltage to the connector and check the light illumination condition.

         

         *a

         Component without harness connected (Map Light Assembly)

         -

         -

         OK
         Tester Connection Switch Condition Specified Condition N7-17 (ILL) - Battery positive (+) N7-28 (ILL-) - Battery negative (-) Always Illuminates

         If the result is not as specified, replace the map light assembly.