SLIDING ROOF SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE SLIDING ROOF SYSTEM

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function(s) can be customized.

    • Be sure to make notes of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    1. Customizing with the GTS

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Slide Roof.

      5. Select the setting by referring to the table below.

        Slide Roof

        Tester Display

        Description

        Default

        Setting

        ECU

        Front SW Auto Operation

        This function is used to enable or disable the auto operation.

        ON

        0:OFF,1:ON

        Sliding roof drive gear sub-assembly (Sliding roof ECU)

      6. Enter the following menus: Customize Setting / Security.

      7. Select the setting by referring to the table below.

        Security

        Tester Display

        Description

        Default

        Setting

        ECU

        Slide Roof Open Warning

        This function is used to enable or disable the sliding roof open warning.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)