VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the RH side.

PROCEDURE


  1. REMOVE VISOR ASSEMBLY


    1. A004IFL

      Remove the 2 screws.

    2. Disengage the visor assembly from the visor holder.

    3. A004JJK

      Disconnect the connector and remove the visor assembly.

  2. REMOVE VANITY LIGHT LENS


    1. A004HJYE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the vanity light lens.

  3. REMOVE VANITY LIGHT BULB


    1. Remove the vanity light bulb from the visor assembly.