HEADLIGHT ASSEMBLY(for Halogen Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RH and LH sides.

  • The procedure listed below is for LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Engage the clamp.

    2. Install the headlight assembly with the bolt.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    3. Install the clip.

    4. Connect each connector.

  2. INSTALL FRONT BUMPER SIDE SUPPORT LH


    1. Install the front bumper side support LH with the 3 bolts B.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Install the bolt A.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    3. Engage the 2 clamps to connect the wire harness.

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT

    Click here

  5. PREPARE FOR HEADLIGHT AIMING

    Click here

  6. INSPECT HEADLIGHT AIMING

    Click here

  7. ADJUST HEADLIGHT AIMING

    Click here