IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

1. INSTALL SPARK PLUG

   Click here

2. INSTALL NO. 1 IGNITION COIL

   Tech Tips

   Perform "Inspection After Repair" after replacing a No. 1 ignition coil.

   Click here

   
   

   1. Install the 4 No. 1 ignition coils to the cylinder head cover sub-assembly with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If a No. 1 ignition coil has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

   2. Connect the 3 No. 1 ignition coil connectors.

   3. Install the engine wire to the cylinder head cover sub-assembly with the nut.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   4. Engage the 2 clamps.

   5. Connect the camshaft position sensor connector.

   6. Connect the No. 1 ignition coil connector.

   7. Connect the fuel pump assembly connector.

   8. Connect the sensor wire connector.

3. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing a No. 1 ignition coil or spark plug.

      Click here