FRONT SEATBACK HEATER INSTALLATION

  1. INSTALL FRONT SEATBACK HEATER ASSEMBLY

    1. Using a tacker, install the front seatback heater assembly to the separate type front seatback cover with 8 new tag pins.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

    1. Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 2 new hog rings.

      A011YM7

      Note

      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

    2. Engage the 2 fasteners.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    1. Temporarily install the separate type front seatback cover with pad.

    2. Engage the 4 claws to install the 2 front seat headrest supports.

    3. Engage the 2 hooks.

      CAUTION:

      • For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after engage the 2 hooks.

      • Engage the 2 hooks securely.

      1. Slide each hook to engage them.

      2. Install the 4 clips.

    4. Engage the 2 fasteners.

    5. Engage the hook.

  4. CONNECT CONNECTORS

    1. Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.

      A011WWZE01

    2. Engage the clamp (B).

    3. Connect the connector (A).

    4. Connect the connector (E).

    5. Engage the clamp (F).

  5. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    1. Connect the 2 rubber bands of the separate type front seatback cover.

  6. INSTALL FRONT SEAT ASSEMBLY

    Click here